Products
Home Stability Test Chamber Photostability Test Chamber

Photostability Test Chamber

XCH-TPS Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, which can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled.


Model: 150TPS~500TPS

TEMP Range: 15~50℃

Fluctuation: <±0.5℃

TEMP Deviation: < ±2.0℃(SAME LEVEL)
Light Range: Visible light range: 100 ~ 8000LUX 

Total illumination should not be less than 1.2 x 10^6Lux·hr
UV range: NUV range: 0.84 ~ 5w/m squared

The near-UV energy is no less than 200w•hr/㎡
UV wavelength: NUV wavelength: 320 ~ 400nm;

  • Item NO.:

    150TPS~500TPS
  • Product Origin:

    China
  • Print speed:

  • Voltage:

  • Print method:

  • PRODUCT OVERVIEW

 Photostability Test Chamber

What is stability chamber? It is a advanced humidity controlled stability chambers for precise temperature control. FDA/ICH Approved. XCH stability test chamber can be equipped with near-ultraviolet lamps, meeting the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoei. And widely used for research on the pharmaceutical industry,Medical industry,Biotechnology industry and other life science-related industries.

Key Features:


Light Source Design: Top light source design, the sample of different position of shelf has good uniformity of receiving light source irradiation


Insulation material: Integral polyurethane foam technology, with good heat preservation and moisture retention performance


Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean,the out shell is plastic sprayed steel plate


Refrigerating System: The imported fully enclosed industrial compressor, long-life, low noise.


Control System: The imported digital display illuminance controller,High control accuracy.


Safety device: compressor overheat and overpressure overload protection, Fan overheat protection.


Dual Protection: Equipped with independent overtemperature protection system, can automatically cut off the power supply


Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard


Meet a criterion: Meet ICHQ1B、Chinese Pharmacopoeia 2020 edition


SMS alarm: Optional.


Stability chamber specification:

MODEL

TEMP RANGE

CAPACITY(L)

INTERNAL DIMEN(mm)

W×D×H

EXTERNAL DIMEN(mm)

W×D×H

POWER(KW)

TRAY

SystemIllumination range
Remarks

XCH-150TPS

15~50℃

150

650×490×500

800×790×1250

1.0

1


Visible light:
100 ~ 8000Lux
Near UV:
0.84 ~ 5w/m2

1*independent light source system
1*printing storage system

XCH-150TPS
15~50℃

250

600×500×830

760×870×1650

1.5

2


2*independent light source system
2*printing storage system


XCH-150TPS
15~50℃

500

680×680×1070

840×1050×1850

2.2

3


3*independent light source system
Print and store 3 layers of data


XCH-150LTPS

2~30℃

250

600×500×830

760×870×1650

1.5

1

Visible light:
100 ~ 5000Lux
Near UV:
0.84 ~ 1w/m

1*independent light source system
1*printing storage system

XCH-150LTPS
2~30℃
500
680×680×1070
840×1050×1850
2.2 2
2*independent light source system
Print and store 2 layers of data


Advantages:

No maintenance.No pollution source
High sensitivity, low annual drift
High precision

Safety,with alarm system

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #
  • If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products
Walk-in Stability Chamber
Walk-in Stability Chamber 8000SD-15000SD

XCH 8000-15000SD Series humidity and temperature controlled chamber, newly airway system designed achieves uniform of temperature and humidity form different parts inside the chamber. The inner wall and duct plate are made of stainless steel 304. Observation window of hollow tempered glass with electrothermal film. Temperature Range: 20~ 45℃ Temperature Fluctuation:≤ ±0.5℃ Temperature Deviation:≤ ±1.0℃ Humidity Range:40~80%RH(or 20~80%RH)); Humidity Deviation:≤ ±3.0%RH Test Points Optional:40℃ /75%RH、25℃ /60%RH、30℃ /65%RH (40℃ /25%RH、25℃ /40%RH、25℃ /60%RH) Low Temperature Laboratory: 2 ~ 8℃

stability chamber, pharmaceutical stability test chamber, medical stability chamber
Laboratory Stability Test Chamber For Medicine

The 150SD-500SD temperature and humidity test chamber, high quality stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug, medicine and other products fields stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test. Model: XCH-150-500SD-2 Capacity: 150L~500L TEMP Range: 10~65℃ Fluctuation: <±0.5℃ Deviation:<±1.0℃ Humidity Range: 20~95% Fluctuation: <±3.0%RH Deviation:<±3.0%RH Environment temperature: +5 ~ 35℃

stability chamber, pharmaceutical stability test chamber, medical stability chamber
Pharmaceutical stability chamber

The XCH 320SD-620SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records. Model: XCH-320-620SD/CSD Temperature Range: 10~65℃ Temperature Fluctuation: <±0.5℃ Temperature deviation: <±1.0℃ Humidity Range: 20~95%RH Humidity deviation:  < ±3%RH Power: AC 220V±10% 50HZ Environment temperature: +5 ~ 35℃

Medicine Stability Testing Chamber,Temperature Humidity  Chamber, Medicine Testing Chamber
Double door medical stability environmental test chamber

The Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, stable and reliable performance, suitable GMP certified users TEMP Range: 10~65℃ Humidity Range: 40 ~ 95% Capacity: 800L~3000L Fluctuation: <±0.5℃ TEMP Deviation: < ±2.0℃ Humidity Deviation:< ±3%RH Environment temperature: +5 ~ 35℃

Thermostatic Incubator, Laboratory incubator
Thermostatic Incubator

The Thermostatic Incubator is used for storing bacteria and biological culture for colleges, universities, medicine, and biological scientific research departments. It is an essential equipment for scientific research laboratories. Model: 9050GHP~9270GHP Environment temperature: +5 ~ 30℃ Temperature Fluctuation ≤ ±0.3℃ Temperature Uniformity ≤ ±0.5℃(@37℃) Timing Range: 1-9999min Power: AC 220V±10% 50HZ Optional: printer or RS485 interface

stability chamber, pharmaceutical stability test chamber, medical stability chamber
Laboratory Stability Test Chamber For Medicine

The 150SD-500SD temperature and humidity test chamber, high quality stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug, medicine and other products fields stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test. Model: XCH-150-500SD-2 Capacity: 150L~500L TEMP Range: 10~65℃ Fluctuation: <±0.5℃ Deviation:<±1.0℃ Humidity Range: 20~95% Fluctuation: <±3.0%RH Deviation:<±3.0%RH Environment temperature: +5 ~ 35℃

mildew incubator, mold incubator, laboratory incubator
Laboratory Mold Incubator (with Humidity) 150-250L

XCH Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-150-250MJS Temp.Range: 10℃~60℃ Temperature Fluctuation: ±2.0℃ Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH Environment Temperature: +5 ~ 35℃ Installed Power: AC220V±10% 50HZ

medical refrigerator, pharmaceutical refrigerator
Medical Grade Refrigerator

XCH-MR series Medical Grade Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc. Model: 800MR-2000MR Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃ Optional: Data storage and printing.SMS Alarm(With power off alarm) Multiple devices can share one mobile card

  • Call At :

    Tel : +86 18855619709

    Whatsapp : +86 18855619709

  • Email Us :

    Email : pstc.yujiao@gmail.com

  • Address :

    1F, 2F, No.5 standard factory in the pioneer park of SMES, economic development zone in Zhenxing north road and the west of Wuling south road, Taizhou, Jiangsu.

Copyright © 2024 CHLabEquip Stability test Equipment Co.,Ltd.. All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #