Products
Home Stability Test Chamber Laboratory Stability Test Chamber For Medicine

Laboratory Stability Test Chamber For Medicine

The 150SD-500SD temperature and humidity test chamber, high quality stability chamber, using advanced high-quality components and manufacturing technology, stable and reliable performance, suitable for GMP certified users. Creates a temperature, humidity, light environment for drug, medicine and other products fields stability evaluation. Suitable for accelerated testing, long-term testing, wet test, climatic test and strong light irradiation test.


Model: XCH-150-500SD-2

Capacity: 150L~500L

TEMP Range: 10~65℃

Fluctuation: <±0.5℃
Deviation:<±1.0℃
Humidity Range: 20~95%
Fluctuation: <±3.0%RH
Deviation:<±3.0%RH
Environment temperature: +5 ~ 35℃


  • Item NO.:

    150-500SD-2
  • Product Origin:

    China
  • PRODUCT OVERVIEW

Low Temperature Laboratory Stability Test Chamber For Medicine

The Single Door Medicine Drug Stability Environmental Testing Chamber, using the latest air duct system design, the uniformity of temperature and humidity in different positions in the box is good; Integral polyurethane foaming technology, good heat preservation and moisturizing performance.


Application:

Medicine Stability Testing Chamber apply to investigate the stability of drug substances and preparations, suitable for GMP and CGMP certified users.


Key Features:

• Temperature Control: Temperature Fluctuation ≤ ±0.5℃ ,Temperature Deviation ≤ ±1.0℃


• Structure Design: Adopt the latest airduct system design achieves good uniform of temperature and humidiy form 
different parts inside the chamber.


• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean.


• Refrigerating System: Two sets original imported fully enclosed industrial compressor, high efficiency, low noise, ensure the long-term continuous operation of equipment.


• Humidity System: Original imported capacitive humidity sensor, direct detection of humidity,maintenance-free.


• Control System: Color touch screen temperature and humidity controller,High control accuracy,With three levels permission,audit trail.


• Safety device: compressor overheat and overpressure overload protection, Fan overheat protection、water shortage protection.


• Dual Protection: Equipped with double insurance dry fire protection system, equipped with independent overtemperature protection system, can automatically cut off the power supply;


• Data Record: Equipped with data collection system conform to GMP requirements,Needle micro printer and USB output port as standard.


• Live Alarm: Temperature and humidity upper limit deviation alarm, independent overtemperature alarm.


• Meet a criterion: Meet ICHQ1A(R2)、Chinese Pharmacopoeia 2020 edition.


• Installed Power: AC220V±10% 50HZ


• Environment temperature: +5~35℃


• SMS alarm: Optional


Stability chamber specification:

MODEL

TEMP RANGE

Humidity

RANGE

CAPACITY

INTERNAL DIMEN(mm)

W×D×H

EXTERNAL DIMEN(mm)

W×D×H

POWER

SHELF(Standard)

XCH-150SD-2

10~65℃

20 ~ 95%

150L

 600×405×630

760×830×1500

1.2KW

3

XCH-250SD-2

10~65℃

20 ~ 95%

250L

 600×500×830

760*870*1650

1.5KW

3

XCH-400SD-2

10~65℃

20 ~ 95%

400L

 600×700×950

760×1060×1750

2.0KW

3

XCH-500SD-2

10~65℃

20 ~ 95%

500L

 680×680×1080

 840×1050×1850

2.2KW

4


Advantages:

High performance, low noise
High sensitivity, low annual drift
No pollution source

Easy to clean

Leave A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Related Products
Walk-in Stability Chamber
Walk-in Stability Chamber 8000SD-15000SD

XCH 8000-15000SD Series humidity and temperature controlled chamber, newly airway system designed achieves uniform of temperature and humidity form different parts inside the chamber. The inner wall and duct plate are made of stainless steel 304. Observation window of hollow tempered glass with electrothermal film. Temperature Range: 20~ 45℃ Temperature Fluctuation:≤ ±0.5℃ Temperature Deviation:≤ ±1.0℃ Humidity Range:40~80%RH(or 20~80%RH)); Humidity Deviation:≤ ±3.0%RH Test Points Optional:40℃ /75%RH、25℃ /60%RH、30℃ /65%RH (40℃ /25%RH、25℃ /40%RH、25℃ /60%RH) Low Temperature Laboratory: 2 ~ 8℃

stability chamber, pharmaceutical stability test chamber, medical stability chamber
Pharmaceutical stability chamber

The XCH 320SD-620SD medical stability testing chamber Medicine Stability Chamber, two boxes are independently controlled, climatic test, CSD series, A box has temperature, the three functions of humidity and light can be equipped with near-ultraviolet lamps to meet the requirements of the guidelines for the stability test of the 2020 edition of the Pharmacopoeia; Box B only controls and records. Model: XCH-320-620SD/CSD Temperature Range: 10~65℃ Temperature Fluctuation: <±0.5℃ Temperature deviation: <±1.0℃ Humidity Range: 20~95%RH Humidity deviation:  < ±3%RH Power: AC 220V±10% 50HZ Environment temperature: +5 ~ 35℃

Medicine Stability Testing Chamber,Temperature Humidity  Chamber, Medicine Testing Chamber
Double door medical stability environmental test chamber

The Double Door Medicine Drug Stability Environmental Testing Chamber, using imported high-quality components and manufacturing technology, stable and reliable performance, suitable GMP certified users TEMP Range: 10~65℃ Humidity Range: 40 ~ 95% Capacity: 800L~3000L Fluctuation: <±0.5℃ TEMP Deviation: < ±2.0℃ Humidity Deviation:< ±3%RH Environment temperature: +5 ~ 35℃

Photostability Test Chamber, high light stability chambers
Photostability Test Chamber

XCH-TPS Photostability Test Chamber is equipped with visible light and near-ultraviolet lamp tube, which can independently control the type of light source, and can print and record visible light illumination and near-ultraviolet radiation in real time. Visible light and near-ultraviolet can be directly set, automatically adjusted and precisely controlled. Model: 150TPS~500TPS TEMP Range: 15~50℃ Fluctuation: <±0.5℃ TEMP Deviation: < ±2.0℃(SAME LEVEL) Light Range: Visible light range: 100 ~ 8000LUX  Total illumination should not be less than 1.2 x 10^6Lux·hr UV range: NUV range: 0.84 ~ 5w/m squared The near-UV energy is no less than 200w•hr/㎡ UV wavelength: NUV wavelength: 320 ~ 400nm;

BOD Incubator, cooling incubator, lab incubator
Biochemical BOD Incubator, 0℃~60℃, 70-1000L

LRH Biochemical Incubator & Cooling Incubator uses the latest air duct system to achieve the best level of uniformity of temperature and humidity in different positions inside the chamber. The bod cooling incubator Polyurethane foam technology is adopted, good insulation, energy saving. Provides precise temperature control for reliable results in pharmaceutical, industrial testing, food, cosmetics, and microbiological research. LHR Series Biochemical Laboratory incubators is applied to scientific research and production departments such as environmental protection, sanitation and epidemic prevention, agricultural and livestock aquatic medicine detection and cell culture. Model: 1000LRH Capacity: 1000L TEMP: 0~60℃ Fluctuations: High TEMP ≤ ±0.5℃; Low TEMP ≤ ±1.0℃ Uniformity ≤ ±1.5℃ (@25℃) Installed Power: AC220V±10% 50HZ Environmental Temperature: +5~35℃

Constant Temperature Incubator, Electric Heating incubator
Electric Heating Thermostatic Incubator 50L-600L

DHP Electric Heating Thermostatic Incubator. Excellent temperature uniformity. Digital bacteriological incubator equipped with a special temperature controller, fast induction, small system error. The Electric Heating Thermostatic Incubator is widely used for bacteria culture, fermentation and constant temperature test in medical and health, pharmaceutical industry, biochemistry, agricultural science and other scientific research and industrial production departments.

medical refrigerator, pharmaceutical refrigerator
Medical Grade Refrigerator

XCH-MR series Medical Grade Refrigerator is mainly used to save drugs, reagents, vaccines, biological products and blood products, etc., temperature range is 2-8 ℃, the cooling system, digital temperature control system, air circulation system, temperature sensor, etc. Model: 800MR-2000MR Temperature Control: Temperature Fluctuation ≤ ±1℃ ,Temperature Deviation ≤ ±2.0℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃ Optional: Data storage and printing.SMS Alarm(With power off alarm) Multiple devices can share one mobile card

Thermostatic Incubator, Laboratory incubator
Thermostatic Incubator

The Thermostatic Incubator is used for storing bacteria and biological culture for colleges, universities, medicine, and biological scientific research departments. It is an essential equipment for scientific research laboratories. Model: 9050GHP~9270GHP Environment temperature: +5 ~ 30℃ Temperature Fluctuation ≤ ±0.3℃ Temperature Uniformity ≤ ±0.5℃(@37℃) Timing Range: 1-9999min Power: AC 220V±10% 50HZ Optional: printer or RS485 interface

  • Call At :

    Tel : +86 18855619709

    Whatsapp : +86 18855619709

  • Email Us :

    Email : pstc.yujiao@gmail.com

  • Address :

    1F, 2F, No.5 standard factory in the pioneer park of SMES, economic development zone in Zhenxing north road and the west of Wuling south road, Taizhou, Jiangsu.

Copyright © 2024 CHLabEquip Stability test Equipment Co.,Ltd.. All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #