Constant temperature and humidity controlled chambers is a reliability and efficiency environment test chamber which satisfies the test requirements. This stability climatic chamber adopt imported process design, choose the original imported high quality parts, Stable and reliable performance. It is a reliability and efficiency environment test chamber and temperature and humidity test chamber which satisfies the test requirements.
Model: XCH 800-1000CH
Temp.Range:10℃～60℃
Humi.Range: 50～90%RH
Environment temperature: +5 ～ 35℃
Temperature Fluctuation: ＜±0.5℃
Temperature deviation: ＜±2.0℃
Humidity deviation: ＜ ±5%RH
Power: AC 220V±10% 50HZ
Item NO.:
800CH-1000CHProduct Origin:
ChinaHigh Low Temperature Test Chamber
The constant temperature & humidity chamber, environmental test chamber is mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products, parts and materials in the high and low temperature alternating hot and humid environment when storage, transport and using.
Key Features:
• Temperature Control: Temperature Fluctuation ≤ ±0.5℃ ,Temperature Deviation ＜ ±2.0℃ ,Temperature Uniformity ≤ 2.0℃
• Humidity Control: Humidity Fluctuation ≤ ±3%RH,Humidity Deviation ≤ ±5%RH，,Humidity Uniformity ≤ 5%RH
• Structure Design: Adopt the latest airduct system design achieves good uniform of temperature and humidity form different parts inside the chamber.
• Chamber Material: The liner is made of mirror stainless steel 304, no pollution source, easy to clean.
• Refrigerating System: The imported brand fully enclosed compressor，long-term use ，stable performance.
• Humidity System: Original imported chip capacitive humidity sensor,High sensitivity, low annual drift, direct humidity detection
• Control System: The imported temperature and humidity controller,High control accuracy.
• Safety Device: Compressor overheat protection and overload protection、Fan overheating protection、Water scarcity protection
• Dual protection: Equipped with double insurance dry fire protection system, equipped with independent overtemperature protection system, can automatically cut off the power supply;
• Live Alarm: Temperature and humidity upper and lower limit deviation alarm;Independent overtemperature protection alarm system.
• Installed Power: AC220V±10% 50HZ
• Environment temperature: +5~35℃
• SMS alarm : Optional
• Data record: Optional
Model & Parameters:
| MODEL | TEMP CONTROL RANGE |
Humidity control range |
CAPACITY | INTER DIMEN W×D×H |
EXTER DIMEN W×D×H |
POWER | TRAYS |
| XCH-800CH | 10℃ ～ 60℃ | 50 ～ 90% | 800L | 1200×490×1360(mm) | 1360×850×1960(mm) | 2.5KW | 4 |
| XCH-1000CH | 10℃ ～ 60℃ |
50 ～ 90% |
1000L | 1400×510×1400(mm) | 1560×870×1980(mm) | 3.0KW | 4 |
| Double door constant temperature humidity environmental chamber | |||||||
Different sizes of chambers can be customized
Application:
The constant temperature and humidity testing environmental chamber is applied to temperature and humidity environmental tests of electrical and electronic products, materials, textiles, and pharmaceutical packaging.
Advantages:
Sensitive, small system error
Independent over-temperature protection alarm system
No pollution source and is easy to clean
Low cost
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
XCH 150-500CH Constant temperature and humidity test chamber, is a best Constant Temperature Chamber, Adopt imported process design, Choose the original imported high quality parts, Stable and reliable performance. It is a reliability and efficiency environment test chamber which satisfies the test requirements. Model: XCH 150-500CH Temp.Range: 10℃～60℃ Humi.Range: 50～90%RH Environment temperature: +5 ～ 35℃ Temperature Fluctuation: ＜±0.5℃ Temperature deviation: ＜±2.0℃ Humidity deviation: ＜ ±5%RH Power: AC 220V±10% 50HZ
XCH150-500CT Constant temperature test chamber, a perfect stability climatic chamber, equipped with programmable color touch screen controller. It was used in temperature and humidity test chamber of electrical and electronic products, materials, textile, medicine package, etc. Model: 150-500CT Temp.Range: 10℃～100℃ Temperature Fluctuation: ＜±0.5℃ Temperature deviation:＜±1.0℃ Power: AC 220V±10% 50HZ
XCH JSB Series is a temperature & humidity chamber with high and low temperature Chamber. Through the test and detection, so as to judge whether the performance of the product meets the design requirements for testing. Model: 100JSB-1000JSB TEMP Range: -40-150℃ Installed Power: AC220V±10% 50HZ Environment temperature: +5~35℃
The High and Low Temperature and Humidity Chamber used for adaptability test of electrical and electronic products, components and materials in storage, transportation and use under high temperature and low temperature test chamber. Model: 100GDB-1000GDB TEMP Range: -40~150℃ Temperature Fluctuation ＜ ±0.5℃ Temperature Deviation ＜ ±2.0℃ Heating Rising Rate: 1 ～ 3℃ /Min Cooling Fall Rate: 0.7 ～1℃ /Min Environment temperature: +5 ～ 35℃ Power: AC220V±10% 50HZ
The high temperature chamber simulates harsh weather conditions to test the product's ability to withstand extreme temperatures and humidity, analyze and evaluate whether components and materials can be stored, transported and used at high and low temperatures for a long time in the terminal market without damage. Model: 100GW-1000GW/GWH TEMP Range: 10~200℃ Fluctuation: ＜±0.5℃ Deviation: ＜±2.0℃(＜200℃) Deviation: ＜±3.0℃(200℃~300℃)
CHLabEquip high precision vacuum drying oven with vacuum indicator display, used for temperature or gas sensitive vacuum drying and storage. The vacuum drying oven is suitable for hot places in a vacuum environment such as defoaming, dehydration, hardening and drying after cleaning treatment in the production process of electronic products. Environment temperature: +5 ～ 35℃ Temperature Fluctuation: ±1.0℃ Temperature Accuracy: ±0.1℃ Power: AC 220V±10% 50HZ Vacuum degree: vacuum indicator display
XCH Mold incubator, Humidity Equipped. 150L capicity, Temperature Range 10-60℃. Equipped with UV germicidal lamp. Mold incubator is an experimental equipment suitable for cultivating eukaryotic microorganisms such as mold. It is a special constant temperature equipment for water body analysis, BOD detection, mold and other microorganism cultivation. Model: XCH-150-250MJS Temp.Range: 10℃～60℃ Temperature Fluctuation: ±2.0℃ Humidity Range: 50-90%RH Humidity Fluctuation: ±5%RH Environment Temperature: +5 ～ 35℃ Installed Power: AC220V±10% 50HZ
The Thermostatic Incubator is used for storing bacteria and biological culture for colleges, universities, medicine, and biological scientific research departments. It is an essential equipment for scientific research laboratories. Model: 9050GHP~9270GHP Environment temperature: +5 ～ 30℃ Temperature Fluctuation ≤ ±0.3℃ Temperature Uniformity ≤ ±0.5℃（@37℃） Timing Range: 1-9999min Power: AC 220V±10% 50HZ Optional: printer or RS485 interface
Call At :
Tel : +86 18855619709
Whatsapp : +86 18855619709
Email Us :
Email : pstc.yujiao@gmail.com
Address :
1F, 2F, No.5 standard factory in the pioneer park of SMES, economic development zone in Zhenxing north road and the west of Wuling south road, Taizhou, Jiangsu.
Copyright © 2024 CHLabEquip Stability test Equipment Co.,Ltd.. All Rights Reserved.
IPv6 network supported
English
